| Maxi-Joint – Rubber, Teflon & Metal Expansion Joints • Spray Shields • Penetration Seals | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wide Arch | Single & |
Reducers | Completely Versatile | No Arch | Spherical | Molded Teflon | Sleeve Joints | Metal Hose & Joints |
Control Units & Accessories |
Duct Joints | Spray Shields | Penetration Seals |
| Flex Valve – Pinch Valves • Pressure Isolation Rings • Duck Bill Check Valves | |||||||
|---|---|---|---|---|---|---|---|
| Isolation Pinch Valves |
Control Pinch Valves |
Interchangeable Pinch Valves |
Shell & Tube Pinch Valves |
Slip-on Pinch Valves |
Replacement Components |
Pressure Isolation Rings |
Duck Bill Check Valves |
| SoundZorber – Noise & Vibration Control Products • Seismic Restraints | ||||||
|---|---|---|---|---|---|---|
| Mounts | Hangers | Pads | Pump & Equipment Bases |
Flex Connectors | Seismic Restraints | |
Molded & Teflon Lined Wide Arch Expansion Joints
Molded Wide Arch Expansion Joint
Style 1015Economical molded wide arch design with industry standard face to face dimensions.
Teflon Lined Molded Wide Arch Expansion Joint
Style 1015TSuperior chemical resistance with industry standard face to face dimensions.
Single & Multiple Arch Expansion Joints, Versatile Hand-Built Construction
Single (1) Wide Arch, Spool Type, Expansion Joints
Style 1101 Heavy duty construction with greater movements and lower spring rates than conventional joints.
Double (2) Wide Arch Expansion Joints
Style 1102, 1202Heavy duty construction with double the movements and 1/2 the spring rates of our Style 1101
Triple (3) Arch Expansion Joints
Style 1103, 1203Heavy duty construction with triple the movements and 1/3 the spring rates of our Style 1101
Quadruple (4) Arch Expansion Joints
Style 1104, 1204Heavy duty construction with quadruple the movements and 1/4 the spring rates of our Style 1101.
Reducer Type Expansion Joints
Concentric Reducer Expansion Joints
Style 1101 CRHeavy duty construction with exceptional all directional movement capability
Eccentric Reducer Expansion Joints
Style 1101ERHeavy duty construction with exceptional all directional movement capability.
Lightweight, High Pressure, High Temperature & Dismantling Expansion Joints, Completely Versatile Hand-Built Construction
Lightweight Expansion Joints
Style 1101LW Extremely flexible body designed for greater movements and lower spring rates, than our full pressure designs.
High Pressure Expansion Joints
Style 1101HP Extreme pressure design with exceptional all directional movement capability.
High Temperature Expansion Joints
Style 1101HT Extreme temperature design with exceptional all directional movement capability
Dismantling Expansion Joints
Style 1101DJ Retractable design for dismantling applications with exceptional all directional movement capability
No Arch Pipes & Fittings
No Arch (Straight) Rubber Flanged Pipes
Style 1100 Simple but effective design for absorbing noise, vibrations and all directional movements
No Arch (Elbows & Tees) Rubber Flanged Fittings
Style 1100-45, 1100-90, 1100-TF Simple but effective design for absorbing noise, vibrations and all directional movements.
Spherical Connectors
Single Sphere Connector
Style 1010 Economical molded spherical design with floating flanges. Ideal for noise and vibration control
Double Sphere Connector
Style 1020 Economical molded spherical design with floating flanges. Ideal for noise and vibration control
Double Union Sphere Connector
Style 1030 Economical molded spherical design with union ends. Ideal for noise and vibration control
Molded Teflon® Expansion Joints
Two Convolution Molded Teflon Coupling
Style 3302 Superior chemical resistance with industry standard face to face dimensions
Three Convolution Molded Teflon Expansion Joint
Style 3303 Superior chemical resistance with industry standard face to face dimensions
Five Convolution Molded Teflon Bellows
Style 3305 Superior chemical resistance with industry standard face to face dimensions
Sleeve Type (Slip-on) Expansion Joints
Single (1) Arch, Sleeve Type, Expansion Joints
Style 1081 Economical slip-on design eliminates the need for mating flanges and hardware
Double (2) Arch, Sleeve Type, Expansion Joints
Style 1082 Economical slip-on design with double the movements and 1/2 the spring rates of our Style 1081
Triple (3) Arch, Sleeve Type, Expansion Joints
Style 1083 Economical slip-on design with triple the movements and 1/3 the spring rates of our Style 1081.
Metal Braided Hose & Expansion Joints
Braided Stainless Hose with Male Nipples
Style BSH-MN Stainless steel corrugated hose and braid with carbon steel male NPT threaded ends
Braided Stainless Hose with Rigid Flanges
Style BSH-RF Stainless steel corrugated hose and braid with carbon steel plate flanges
Braided Bronze Hose with Sweat Ends
Style BBH-SE Bronze corrugated hose and braid with female sweat ends.
Stainless Steel Expansion Joints
Style SSEJ-WE, SSEJ-RF Stainless steel expansion joints with welded ends or rigid flanges.
Control Units & Accessories
Control Units
Style GR/B, GR/W, W/CS, W/B, W/W, INT-W/B, SW/B, SW/SW, SW/W Control units are offered in a variety of arrangements for optimal expansion joint performance and safety.
Stainless Steel Spherical Washers
Style SW Spherical washers prevent control rod binding and minimize lateral movement reaction forces.
Pipe Guides
Style PG Prevent squirming of the piping system by installing pipe guides and following proper spacing recommendations.
Duct Type & Composite Belt Expansion Joints
Duct Type Expansion Joints with Slip-on Ends
Style 1080LW, 1081LW, 1091 Economical and extremely flexible slip-on design eliminates the need for mating flanges and hardware.
Duct Type Standard Molded Expansion Joints with Rigid Flanges
Style 1092, 1097 Up to 400ºF and ± 3 PSI continuous service, available round or rectangular, offers exceptional all directional movement capability.
Duct Type PTFE Expansion Joints with Rigid Flanges
Style 1093 Up to 600ºF and ± 3 PSI continuous service, available round or rectangular, offers exceptional all directional movement capability.
Duct Type PTFE/Insulated Expansion Joints with Rigid Flanges
Style 1094 Up to 1,000ºF and ± 3 PSI continuous service, available round or rectangular, offers exceptional all directional movement capability.
Duct Type Solid PTFE Expansion Joints with Rigid Flanges
Style 1095 Up to 500ºF and ± 3 PSI continuous service, available round or rectangular, offers an improved cycle life.
Duct Type Versatile Hand-Built Expansion Joints with Rigid Flanges
Style 1098 Up to 400ºF and ± 3 PSI continuous service, available round or rectangular, molded arch(s) offers the ultimate in movement and flexibility.
Composite Belt Type Expansion Joints
Style 1096FF, 1096DB, 1096RF, 1096AF Up to 1200ºF and ± 3 PSI continuous service, available round or rectangular, offers exceptional all directional movement capability.
Teflon® Spray Shields
Teflon® Spray Shields
Style TSS Safely deflects harmful spray-out if leakage occurs at flanges, valves or expansion joints.
Link & Expansion Penetration Seals
Expansion Penetration Seals
Style EPS Rubber bellows seals pipes through walls, floors and casings while providing needed flexibility and all directional movement capability.
Isolation (On/Off) Pinch Valves
Manual, Closed Body, Pinch Valves
Style 2100 Replaces gate, plug and ball valves and is ideal for manual isolation of any slurry.
Manual, Open Body, Pinch Valves
Style 2150, 7250 Operator can easily see if the valve is open or closed making it the valve of choice in mining applications.
Control Pinch Valves
Manual, Closed Body, Control Pinch Valves
Style 2200 Modular design with an ISA standard length make this pinch valve an ideal slurry control valve.
Electric, Closed Body, Control Pinch Valve
Style 2200EA Designed for electric control of abrasive, corrosive, viscous or scaling fluids.
Pneumatic, Closed Body, Control Pinch Valve
Style 2200PA Designed for pneumatic control of slurries with an NFPA mounted cylinder.
Pneumatic, Closed Body, Control Pinch Valve
Style 2200DA Features a diaphragm actuator for sensitive flow control and can be installed in any position
Interchangeable Pinch Valves
Manual, Closed Body, Interchangeable Pinch Valves
Style 2300 Interchangeable with plug valves in all sizes.
Manual Bevel Gear, Closed Body, Interchangeable Pinch Valves
Style 2300BG Bevel Gear actuated for low rim pull and interchangeable with plug valves in all sizes.
Electric, Closed Body, Interchangeable Pinch Valves
Style 2300EA Interchangeable with electric actuated plug valves in all sizes.
Pneumatic, Closed Body, Interchangeable Pinch Valves
Style 2300PA Designed for pneumatic actuation and interchangeable with plug valves in all sizes.
Shell & Tube (Pneumatic) Pinch Valves
Shell & Tube Pinch Valves
Style 9500A Economical shell and tube design is light weight and ideal for low pressure applications.
Slip-on Pinch Valves
Slip-on, Open Body, Pinch Valves
Style 7100 Economical manual, open body, pinch valve can be adapted to a wide range of applications.
Slip-on, Shell & Tube, Pinch Valves
Style 7500 Economical design can be adapted to a wide range of applications.
Replacement Components
Replacement Components
Parts & Sleeves With “Original Pinch Valve” drawings dating back to the 1940’s, we operate the world’s largest pinch valve spare parts department. Replacement parts and sleeves often out perform original equipment.
Pressure Isolation Rings
Pressure Isolation Rings
Style 5500-PIR This 360º Isolation Ring is designed to prevent clogging or fouling of the gauges, pressure switches and transmitters for all slurries.
Duck Bill Check Valves
Slip-on, Duck Bill Check Valves
Style 4100 Reliable and cost effective alternative to flap-gate and other conventional check valves.
Flanged, Duck Bill Check Valves
Style 4200 Reliable and cost effective alternative to flap-gate and other conventional check valves.
In-line Check Valves
Style 4300, 4350, 4320 Reliable and cost effective alternative to conventional in-line check valves.
Folded-Bill Check Valves
Style 4500 The compact design makes it ideal for retrofitting of existing interceptors, manholes and vaults.
Mounts
Free Standing Spring Mounts
Style MSF This laterally stable open spring mount can effectively absorb over 90% of vibration transition.
Horizontally Restrained Spring Mounts
Style MSC This “C” shaped spring mount is horizontally restrained and ideal for small rooftop units.
All Directional Restrained Spring Mounts
Style MSR Ideal for when equipment could be subjected to all directional loads and/or motion.
All Directional Restrained Spring Mounts
Style MSS Ideal for all directional restraint from shock loading, including seismic applications.
Air Springs
Style MAR Lowest Natural frequency of support designed for difficult to handle low frequency disturbance.
Hangers
Spring Hangers
Style HSR The rugged welded steel housing holds the spring isolator and effectively supports piping and equipment.
Pads
Neoprene Mounting Pad
Style MTP Convenient and economical, cut-to-size, noise vibration control mounting pads.
Pump & Equipment Bases
Pump Bases
Style BCB Economical bolted modular construction, minimizes on-site labor and is fitted for all standard pumps.
Bolted Steel Beam Bases
Style BBB Bolted Modular construction utilizing standard channel, minimizes on-site labor for semi-custom bases.
Flex Connectors
Single Sphere Connector
Style 1010 Economical HVAC pump connector with floating flanges, ideal for absorbing noise and vibration.
Double Sphere Connector
Style 1020 Economical HVAC pump connector with floating flanges, ideal for absorbing noise and vibration.
Double Union Sphere Connector
Style 1030 Economical HVAC pump connector with union ends, ideal for absorbing noise and vibration.
Seismic Restraints
Seismic Cable Restraints
Style SCR Galvanized aircraft cable attached to angle support brackets make effective seismic restraint for piping and equipment.
Seismic Snubber Restraints
Style SSR Effective all directional restraint for bases equipped with free standing spring mounts.