Series 6200 Manually Actuated Sizes 1" to 14" diameters The Series 6200 is a completely enclosed, manually operated pinch valve used extensively in controlling of slurries and corrosive flows. An added benefit of this pre-pinched design is the flow control begins immediately upon stem motion to close the valve. This results in the near linear control characteristics of the pre-pinched design. The primary benefit of the Gen-Lok flange is that the entire valve does not need to be removed from the process line upon sleeve replacement. The standard handwheel type valve has a nonrising handwheel and is designed to include a rugged Acme thread system.   FEATURES & BENEFITS Standard Handwheel Operated Flanges Drilled for ANSI 125/150 lb. (tapped in sizes 1 to 2-1/2") Standard (6200) and Heavy Duty (6220) Pre-pinched Port Position Indicator Completely Enclosed Can be Installed in Any Position Nonrising Handwheel Positive Opening Device if Needed Many Accessories are Available Contact factory for submittal data sheets.
All Dimensions expressed in inches Valve Size 1 1-1/2 2 2-1/2 3 4 5 6 8 10 12 14* A 6 6 8 10 12 16 20 24 32 40 48 42 B 7-1/8 7-3/8 10-3/8 10-7/8 11-1/4 12-3/4 18-1/8 18-5/8 23-1/2 25-1/2 29-7/8 29-5/16 C 5 5 8 8 8 12 12 18 22 22 22 22 D 5-7/8 6-3/4 7 8-1/2 8-3/4 10-5/8 12-5/8 14-11/16 18-1/8 21-7/8 25-3/4 27-1/2 E 4-1/4 5 6 7 7-1/2 9 10 11 13-1/2 16 19 21 Max.Pressure (PSIG) 6200 100 100 100 100 75 75 65 65 65 65 65 50 6220 275 250 200 175 175 150 125 125 125 100 100 - Approx. Weight (Lbs.) Aluminum 5 10 15 20 30 45 75 100 160 295 400 700 Cast Iron 15 35 45 60 70 115 160 220 280 385 600 950 *14" size has a 13-1/4" ID and a full face flange. ID will match Schedule 40 pipe. Gearbox recommended on sizes 6" and up.   Valve Data Sheet