Series 2200-EA

Electric Actuated

 

 style 2200 electric actuated pinch valve
Sizes 1" to 12" diameter
FEATURES & BENEFITS
  • Precise and Repeatable Linear Flow Control
  • On/Off or Modulating Service
  • Reduced Port Sleeves Available to Meet Exact Flow Requirements
  • Long Lasting Compression Molded Sleeve is the Only Part Exposed to Process Fluid, Eliminating the Need for Expensive Body Alloys
  • Full Range of Elastomers and Reinforcements Available to Resist Abrasion, Corrosion, and Even the Most Demanding Process Conditions
  • Full Port Eliminates Clogging and Turbulence While Minimizing Pressure Drop
  • Sleeve Flexing Eliminates Scaling or Binding
  • Manual Handwheel Override Standard
  • Drop Tight Bi-Directional Closure
  • No Packing, Gaskets or Seals to Maintain
  • AUMA Electric Actuator Standard
  • Completely Enclosed Rugged Cast Iron Housing
  • Dual Pinching Ductile Iron Mechanism Closes Sleeve on Center
  • Nonrising Stem with External Stroke Adjustment, if the Sleeve Wears
  • Easy Installation with Simple Inexpensive Sleeve Replacement
  • ISA Standard Length for Control Valves per ISA-S75.08 Sizes 1-8”
  • High Cycle Life
  • Actuator and Controls are Hard Mounted to Valve Housing Allowing for Rigid Electrical Connections
  • Factory Assembled, Calibrated, and Tested Prior to Shipment

APPLICATIONS

Flex-Valve’s Style 2200-EA is ideally suited for electric control of abrasive, corrosive, viscous, or scaling fluids such as waste water, mineral slurries, cement, limestone, fly ash, pulp stock, powders and pellets, as well as many other chemicals and difficult to handle materials. Our engineers are available to review your requirements or to conduct an on-site inspection of your application. We will recommend one of our designs or develop one specific to your requirements.

VARIATIONS

Flex-Valve’s Style 2200-EA options include: positive opening tabs, fugitive emissions package, special finishes, precision potentiometers, electronic or inductive position transmitters, explosion proof and weatherproof constructions, as well as many other custom features.

STYLE 2200-EA TECHNICAL ADVANTAGES
  • Flanges Drilled for ANSI 125/150 lbs.
  • Nonrising Stem with External Stroke Adjustment
  • Full Rubber Flange, No Gaskets Required
  • Sleeves Available in a Wide Variety of Elastomers Including Pure Gum Rubber, EPDM, Neoprene, Butyl, Nitrile, Hypalon, Viton®*, Teflon®, Food Grades, and More
  • Factory Tested and Calibrated
Electric Actuator
  • AUMA Electric Actuator On/Off or Modulating Includes:
    • NEMA 4x and 6 Enclosure
    • Bronze Operating Nut
    • Manual Handwheel Override
    • Two Gear Train Limit Switches
    • Two Torque Switches
    • Class F Insulation
    • Reversing Starters
    • Transformer
    • Position Indicator (MDPI)
    • Selector Switch (L/O/R)
 

 

  • On/Off Actuator Includes:
    • Three Pushbuttons (O/S/C)
  • Modulating Actuator Includes:
    • Control Switch (O/S/C)
    • AUMATROL 601 Positioner
    • 4-20 mA DC Signal Input
  • Optional Features:
    • Explosion Proof Construction
    • Weatherproof Enclosures
    • Heaters and Thermostats
    • Position Indicators
    • Precision Potentiometer
    • Electronic or Inductive Position Transmitters
    • Domestic or Overseas Wiring
All dimensions expressed in inches
Valve Size
1
1-1/2
2
2-1/2
3
4
5
6
8
10
12
A
7-1/4
8-3/4
10
10-7/8
11-3/4
13-7/8
15
18
21-3/8
32-1/4
38
B
28-1/4
28-1/4
29
29
30-3/4
34-1/4
35
35-1/2
38
40
41
C
19-1/2
19-1/2
20-1/2
21-1/4
21-1/4
28
28
28
34
34
34
D
7-1/2
7-1/2
9
9
10-1/2
13
17-1/ 4
17-5/16
22-1/2
25-3/4
29
E
2-1/4
2-1/2
3
3-1/2
4
4-1/2
5
6-1/8
7-15/16
9
9-3/4
F
9-3/4
9-3/4
9-3/4
9-3/4
9-3/4
11-1/4
11-1/4
11-1/4
12-1/4
12-1/4
12-1/4
Max. Pressure (PSIG)
150
150
150
150
150
150
150
150
125
100
100
Approx. Weight (Lbs.)
90
140
175
215
245
365
425
455
685
820
1,015
Notes:
  1. For full product specifications and installation instructions see SPEC-2200-EA-1 and ININ-2200-EA-1 respectively.
  2. For sleeve sizing for optimal flow control, consult the factory or see Flexible Valve’s Technical Manual.
  3. Actuator size will vary with service conditions and application effecting stated weights and dimensions.
  4. For horizontal mounting of actuator, a support is required, and it is recommended to consult the factory.

 

 

 

 

* A registered trademark of DuPont Performance Elastomers
Valve Data Sheet